set 'pp' to value missing

Hi

 

I am trying to map the rotary knob on an x touch mini, I have followed all the tutorials on youtube, but I am getting stuck on getting the incoming midi message with the "line set 'pp' to value". instead, I get the following in my incoming midi capture.

Control Change on ch. 11 with CC#:1 (0x01) and value:62 (0x3E)

 

Please help!!!1

 

Chris

 

Hi, that looks like the MIDI you captured.  Once you capture the incoming MIDI into that translator by clicking the message, go to the incoming section (right under where you were) and edit  by checking “Any Value” and then right under that, you can add pp into the box that says “set value to”.

Then for output you can use the value pp and it will send what was captured on incoming.

 

Steve Caldwell
Bome Q and A Moderator and
Independent Bome Consultant/Specialist
bome@sniz.biz

Hi Steve, many thanks for getting back to me quickly, That didnt seem to work for me.

 

I have attached a screenshot of the video tutorial and my screen side by side.

 

Chris

Hi,

First of all, on your MIDI fighter twister it would be better to change the knob to Enc/Dec since I assume you will want to move mouse right for a twist to the right and left for a twist to the left. That way any right movement  of 65 (41 Hex) will move the mouse right and left movement of 63 (39 Hex) you can move the mouse to the left.

Right now you have it set up as an absolute encoder so you would need to use rules to determine if you have an increasing (right) value or decreasing (left value). You can do this with the MIDI Fighter utility.  You can also do it using Bome MIDI translator but it will take a few rules.

Secondly if you want to use the value of pp, you will need to click the right twisty arrow until it opens up additional information below it. (See screenshots)

I’ve also attached an example (but with a different MIDI channel and CC ) using a relative encoder on my MIDI Fighter Twister.