What are the limits on USB devices, hubs, and DIN interfaces?

Hi Guys.

I'm building a dual-tier keyboard setup with pedal board.  Each of my three levels requires a few USB-A midi ports and a few DIN ports; all ultimately connected to my Bome Box.   I'm trying to keep pre-show cabling to a minimum.

Given my setup, is it possible to create a single-wire connection from tier to tier?  (I mean without purchasing more Bome Boxes. ;-) ).  For example, can I put a USB hub on each tier and feed them from a master hub without fouling the BomeBox's USB-MIDI porting?  (Obviously there is a power restriction... but otherwise?)

I could build this device and add some shielded and buffered I2C jumper cables to solve the DIN problem... but I would still need to address the USB separately.   It seems cleaner to build USB distribution (with its phantom power) and convert to DIN wherever necessary.

Suggestions?

I can't give you a definitive answer as I believe the USB spec has a maximum number of layers/devices. I've stacked 2 layers with no trouble. Layer 1 as a Master Hub and then a few hubs attached from there.  Make sure you use powered USB hubs to ensure enough current. For MIDI DIN, I attach something like this.

Steve Caldwell
Bome Q and A Moderator and
Independent Bome Consultant/Specialist
bome@sniz.biz