Keysman
2016-07-27 17:50:00
Hello, I'd like rotate a rotary encoder of Mackie Control protocol by keystroke but I know like not. What rule apply should and what means the Gen. purpose 1 up to 5 in colums type? Here's what I found to:
Notes:
* CW = ClockWise rotation of a rotary encoder (VPot or Scrub Wheel). Translation: message sent when turning it "up"
* CCW = Counter ClockWise rotation of a rotary encoder (VPot or Scrub Wheel). Translation: message sent when turning it "down."
- When the VPots are rotated rapidly CW, a message equal to the number of clicks is sent.
- When the VPots are rotated rapidly CCW, a "65" is sent followed by a message equal to the number of clicks is sent. Think of 65 as "sign indicator."
VPots
Item / Position left/right / Position up/down / Type / CW / CCW / Channel
Vpot 1 / 1 / n/a / Gen. purpose 1 / 1 / 65 / 1
...
Item / Position left/right / Position up/down / MIDI "note" / value/On / value/Off / Channel
Vpot switch 1 / 1 / n/a / G#1 / 127 / 0 / 1
...
Thank you very much.
Notes:
* CW = ClockWise rotation of a rotary encoder (VPot or Scrub Wheel). Translation: message sent when turning it "up"
* CCW = Counter ClockWise rotation of a rotary encoder (VPot or Scrub Wheel). Translation: message sent when turning it "down."
- When the VPots are rotated rapidly CW, a message equal to the number of clicks is sent.
- When the VPots are rotated rapidly CCW, a "65" is sent followed by a message equal to the number of clicks is sent. Think of 65 as "sign indicator."
VPots
Item / Position left/right / Position up/down / Type / CW / CCW / Channel
Vpot 1 / 1 / n/a / Gen. purpose 1 / 1 / 65 / 1
...
Item / Position left/right / Position up/down / MIDI "note" / value/On / value/Off / Channel
Vpot switch 1 / 1 / n/a / G#1 / 127 / 0 / 1
...
Thank you very much.