Krips
2016-11-14 19:51:59
Hi,
I am using a bcf2000 to control a GrandMA2 onpc software what is working well thanks to BMT. But i get stuck on moving the motor faders on the bcf2000 from the GrandMA2 onpc.
i have the faders on preset 1 of the bcf2000 output on NRPN 7-bit on channel 10 msb 0 lsb 0 thru 7 "pp" set to value
BMT Translates this to a note on ch 10 note 0 thru 7 "pp" to value
in GrandMa2 this entry is assigned to the first 8 executors
all of this works well.
BUT... when i move a fader by mouse in the GrandMA2 software the midi output is seen by BMT as a RAW midi format
example for fader 1 the output is F0 7F 7F 02 7F 06 00 01 60 41 F7 and i have no idea on how to translate this to a control change or a nrpn message.
can someone help me on this please?
thanks,
Krips
I am using a bcf2000 to control a GrandMA2 onpc software what is working well thanks to BMT. But i get stuck on moving the motor faders on the bcf2000 from the GrandMA2 onpc.
i have the faders on preset 1 of the bcf2000 output on NRPN 7-bit on channel 10 msb 0 lsb 0 thru 7 "pp" set to value
BMT Translates this to a note on ch 10 note 0 thru 7 "pp" to value
in GrandMa2 this entry is assigned to the first 8 executors
all of this works well.
BUT... when i move a fader by mouse in the GrandMA2 software the midi output is seen by BMT as a RAW midi format
example for fader 1 the output is F0 7F 7F 02 7F 06 00 01 60 41 F7 and i have no idea on how to translate this to a control change or a nrpn message.
can someone help me on this please?
thanks,
Krips