Midi Machine Control Problem

Hi everyboby,

Some Weeks before I had purchased Midi Translater Pro and it works fine, but I have a Problem with Midi Machine Controls.

I want to translate a Record Midi Machine Control message sent from the software:
F0 7F 03 06 06 F7 (I captured this message with MT sent by Samplitude)
and want to translate it to a Note ON message ( 90 5F 7F) (to trigger a Red-Light)
and a Record OFF Message (F0 7F 03 06 07 F7) to translate in 90 5F 00 to stop the Red-Light

I captured the following Midi messages (sent by Samplitude):
Record Start:
F0 7F 03 06 4D 01 01 F7
F0 7F 03 06 06 F7
F0 7F 03 06 4D 01 01 F7
F0 7F 03 06 4D 01 01 F7

Record Stop:
F0 7F 03 06 07 F7
F0 7F 03 06 4D 01 00 F7
F0 7F 03 06 4D 01 04 F7

Samplitude sends a couple of message by pressing the Record button, but the specified message is in it.
MT recieves the messages but doesn´t translate.

Any suggestions ?

Thanks very much!

Pete

Can you show me your translator? Might be able to help from there...

Scott

Hi Attigo,

I hope the translator file is what you meant with

show me your translator

.

I have attached it.
Samplitude Out Port is Digiface Midi 2 Out and I can see the yellow indicator Midi In light flashing when samplitude is sending the MMC message and MT is receiving it.
But the Translate and Midi Out indicator lights stay dark.

I hope this will help!

Pete

Your Translators that are receiving the SYSEX messages are both disabled and have 'swallow message' enabled. You need to active those 2 Translators and deactivate the swallow function.

Scott