Send more than one out from an in?

Hello.

I'm re-mapping my APC20 for use with VDMX. One thing I can't work out is how to configure the lights, I want to be able to send out commands to 5 buttons to switch the light when one button is pressed, but not have this output go to VDMX. I thought about adding an extra virtual port and linking this to the APC20, then send multiple midi hex values. I've tried this, but I think the APC in Bome is only seen as an input (it's on the left of the router chart and my virtual port number 3 is on the right).

So my questions are:

<> is a virtual port specifically for lighting commands a sensible solution?
<> can I send midi back tot he APC20 from Bome?
<> if so, how do I connect VP3 to the APC20 in?

Thanks.

I have this working now, all I need to work out is how to send '90 52 31 90 53 31 90 54 31 90 55 31 90 56 31' 500ms after receiving the input.

At the bottom of the translator window in the Outgoing Action window there is a little delay section. The last one says Delay in milliseconds. Put 500 in that box and you should be good.

Cheers, I hadn't upgraded so didn't have that.